RebeccaL
Apr 3, 09:12 AM
I keep reading on various posts that some people use a wet application method on dry films (PS and SGP).
Can you share your techniques and experiences using the wet apply on these films? Also is the adhesion as good as when applied dry?
I am interested since I have never had problems with dust, but I do have problems aligning it properly.
Aslo some questions about the SGP oleophobic:
1. Meltdownblitz mentioned in another thread that now instead of the single large speaker/cam cutout they have two separate ones. Do you have any pics? That single cutout was the only thing keeping me away from the oleo.
2. Why there is no back protector version of the SGP Oleo?
Can you share your techniques and experiences using the wet apply on these films? Also is the adhesion as good as when applied dry?
I am interested since I have never had problems with dust, but I do have problems aligning it properly.
Aslo some questions about the SGP oleophobic:
1. Meltdownblitz mentioned in another thread that now instead of the single large speaker/cam cutout they have two separate ones. Do you have any pics? That single cutout was the only thing keeping me away from the oleo.
2. Why there is no back protector version of the SGP Oleo?
pdxflint
Mar 19, 03:58 AM
I'm using LR3 on a SR Macbook Pro 2.2 with 4GB RAM (2007 version,) and it is really very acceptable. I am processing files from my D300, so they're a bit smaller than yours, and I can't compare my experience to your Macbook, but you should have no problem running LR on any newer Macbook Pro, probably even the Air, as long as you have enough RAM. The issue for me would be screen size, and the 15.4" screen seems just about right for laptop use where it doesn't seem too crowded. The one thing that seems to take a bit of processing power is when importing images, even just adding them to the library without copying them, because LR renders thumbnails of each image. This seems to put a bit of a load on processing if there are a few hundred of them. Another thing that can eat processor cycles is exporting slideshows w/music into video... but that's probably not exclusively a LR issue.
phantomsd
Mar 11, 12:42 AM
I might cruise by during lunch to see if a line has already started... I won't be able to return until prob 4pm. Hope the wait won't be bad.
Mikesus
May 3, 09:58 PM
Did you try it without reloading anything?
more...
bcaslis
Apr 17, 06:07 PM
This can be fixed by loosening the bottom screws (requires a special tool) and retightening in the right order. If everything else on it seems good then I would ask them to do this. If there are other problems than an exchange might be better.
parkp81
Apr 1, 08:26 PM
I ran into the same issue with pwnage tool and tetheredboot and with snowbreeze I ran into the issue with the iPad being stuck at the apple logo after running the updates in Cydia. I'm back to square one.:(
more...
johnNYChingaz
May 4, 01:44 PM
they prolly didnt bother since this update was rushed out to take care of the tracking problem, they will prolly fix it on the next of just let it live till IOS 5
jhatz
Apr 18, 11:17 AM
I would try a Mr. Clean Magic eraser on a small spot on the bottom to see how it cleans. It should work well. I used it on my old black MacBook and it made it look like new again. Don't use it on the LCD however. Get Monster LCD cleaning solution (it comes in a blue bottle for like $20). It's well worth it, the consistency of the liquid is a gel type spray so it won't ever run even if you spray directly onto the screen panel itself.
Back to the magic eraser, it removes pesky oily spots that appear to look like wear on the keys/hand rests/track pad. I haven't found any way to officially clean my macbook until I used them.
Back to the magic eraser, it removes pesky oily spots that appear to look like wear on the keys/hand rests/track pad. I haven't found any way to officially clean my macbook until I used them.
more...
maturola
Mar 15, 09:57 AM
Odd I used TinyUmbrella to save the SHSHs for 4.2.1 but now after trying to restore I'm with 4.3 and no option of going back to 4.2.1..bumer
You won't find an "option" to go back. You need to run TU TSS server (That simulates Apple Servers but point locally instead of the internet), and them manually restore to an older firmware.
You won't find an "option" to go back. You need to run TU TSS server (That simulates Apple Servers but point locally instead of the internet), and them manually restore to an older firmware.
Old Muley
May 5, 10:39 AM
BBB ratings are no longer very reliable. You can get rid of a bad rating by buying advertising from BBB. I never trust a BBB rating anymore.
Yeah, BBB has gotten so bad that I get suspicious of any retailer that brags about their BBB rating. The bigger the BBB logo is on a retailers website, the more problems you're going to have.
Yeah, BBB has gotten so bad that I get suspicious of any retailer that brags about their BBB rating. The bigger the BBB logo is on a retailers website, the more problems you're going to have.
more...
njaremka
Mar 23, 12:21 PM
i do not unfortunately, how do i get this installed? is there a way without the disks?
Cosby Show#39;s Keshia Knight Pulliam @SATC 2 Private Screening
more...
Keisha knight
Keshia Knight Pulliam
more...
Keshia Knight Pulliam Covers
Keshia Knight Pulliam (Rudy
more...
(Keshia Knight Pulliam)
Keisha Knight Pulliam (Rudy
Keshia Knight Pulliam gets to
Detrius
May 3, 06:41 PM
I don't care what they change so long as it's user-replaceable, and until then, I will continue to recommend against them to customers. As it stands, it's barely technician-replaceable, as the rubber bottom normally gets torn in opening the thing.
more...
kdoug
May 2, 09:37 PM
I have a 2011 MBP 17" and I order the kit from MaxUpgrades.
The kit including optibay, enclosure for superdrive and a Vertex3 120GB and two day shipping was $370 IRC. They even managed to ship the same day I ordered. So it was definitely a plus. Considering you have a maybe pick a SATAII based SSD unless you plan to upgrade some time down the road so you could recycle the SATAIII SSD.
The only downside is that it doesn't come with any instruction. But then again, it's not very different to others. Just be careful and you shouldn't have any problem.
The optibay is very well made, feels solid when holding. I didn't have any fitting issue although some other users have reported some slight problems. I think it's because they are pretty tight fit, so don't tighten then screw all the way until you have all 3 on.
I ordered the Maxupgrades kit also. Seemed like a bargain compared to OWC's. I've been rally happy with the dealings I've had with them. I have no idea why there's a love affair with OWC. Opened or unopened, their 15% restocking fee is a sham.
The kit including optibay, enclosure for superdrive and a Vertex3 120GB and two day shipping was $370 IRC. They even managed to ship the same day I ordered. So it was definitely a plus. Considering you have a maybe pick a SATAII based SSD unless you plan to upgrade some time down the road so you could recycle the SATAIII SSD.
The only downside is that it doesn't come with any instruction. But then again, it's not very different to others. Just be careful and you shouldn't have any problem.
The optibay is very well made, feels solid when holding. I didn't have any fitting issue although some other users have reported some slight problems. I think it's because they are pretty tight fit, so don't tighten then screw all the way until you have all 3 on.
I ordered the Maxupgrades kit also. Seemed like a bargain compared to OWC's. I've been rally happy with the dealings I've had with them. I have no idea why there's a love affair with OWC. Opened or unopened, their 15% restocking fee is a sham.
Lau
Sep 22, 06:52 PM
Sorry - slow reply. If it's an upgrade thing, well, than that's fine! As long as the people who are up to date can see it that's ok. I need to find an up to date tester now!
more...
John J Rambo
Apr 7, 06:05 AM
I only had a few minutes this morning to look at this but I believe the main problem is your not calling the "mail" command. You have this line but it's not doing anything as it's just a variable...
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
Hi thanks for looking at this, I tried what you said but Im still not able to receive the email, could there be a server setting or email setting that I need to enable?
thanks
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
Hi thanks for looking at this, I tried what you said but Im still not able to receive the email, could there be a server setting or email setting that I need to enable?
thanks
Jetson
Jan 3, 02:37 PM
I haven't have any problems burning AAC to CD.
Here is a link to a discussion of AAC issues. Hopefully your answer is there (if you've not already seen this website).
Good luck.
the.taoofmac.com/space/AAC (http://)
Here is a link to a discussion of AAC issues. Hopefully your answer is there (if you've not already seen this website).
Good luck.
the.taoofmac.com/space/AAC (http://)
more...
princealfie
Mar 13, 09:50 AM
Won't upgrade without this error in iTunes and tinyumbrella won't start in TSS server. Any ideas on how to upgrade a JB iPad? Due to servers being down?
Cr0nus
Feb 19, 06:25 PM
Your MBP is definitely a pillow. pillow: anything used to cushion the head. http://dictionary.reference.com/browse/pillow
MilesNigel
Mar 16, 11:30 PM
Thanks for the input! I'd never heard of HomePlug, interesting.
For my present situation, t sounds like basically the whole setup is pretty low grade; I've got a slow external hard drive & wifi is just plain slow to begin with. I might end up getting an additional hard drive for my desktop and using the "sharing" option as suggested. Trying not to spend much money =)
Thanks again! I'll let you know what I come up with.
For my present situation, t sounds like basically the whole setup is pretty low grade; I've got a slow external hard drive & wifi is just plain slow to begin with. I might end up getting an additional hard drive for my desktop and using the "sharing" option as suggested. Trying not to spend much money =)
Thanks again! I'll let you know what I come up with.
phantomsd
Mar 11, 11:33 AM
I'm going go to early, around 10/11. Will let you all know how long the line is.
Awesome. camarobh from the "line spec" thread was going to check around 10 as well.
Awesome. camarobh from the "line spec" thread was going to check around 10 as well.
itsjustmeee
Apr 4, 11:31 AM
Is there any advantage to pairing an ipad 2 and a macbook pro together via bluetooth? Any practical applications that this can be used for?
jdreier
Apr 29, 01:02 PM
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
Daedalus256
Dec 15, 10:58 AM
Well, I only have like $40 in my bank account right now, which isn't too good, ESPECIALLY with christmas. So what does one do when one runs low on cash? Why sells his earthly posessions of course! I have a couple macs I MIGHT be willing to part with. I'm not sure on either of them yet but they are both possibilities.
First up is my PowerMac G4 Sawtooth:
400mhz G4 Processor
1GB RAM
ATI Radeon 8500 64MB AGP GFX Card
80GB HDD
DVD-ROM and ZIP drives
This is a frickin great machine. It's currently sitting at home in my desk waiting to be used and I can hear it crying because I'm thinking of selling it.
http://img345.imageshack.us/img345/834/setup61hi.th.jpg (http://img345.imageshack.us/my.php?image=setup61hi.jpg)
Second up, my dearly loved Powerbook G3 Wallstreet.
266mhz G3 Processor
128MB RAM
10GB HDD
4MB Shared Video RAM
2 PC Card slots
14" TFT Screen
CD-ROM Drive
This also, an EXCELLENT backup laptop. It's currently loaded with OS 9.2. I was originally planning to upgrade this puppy BIG TIME but I've run into cash problems. Only problem with this laptop is that the battery is dead.
http://img319.imageshack.us/img319/8726/wallstreet10yi.th.jpg (http://img319.imageshack.us/my.php?image=wallstreet10yi.jpg)
Let me know if you're interested at all and maybe make me an offer? I'm not sure if I want to sell these but all signs are pointing to yes.
First up is my PowerMac G4 Sawtooth:
400mhz G4 Processor
1GB RAM
ATI Radeon 8500 64MB AGP GFX Card
80GB HDD
DVD-ROM and ZIP drives
This is a frickin great machine. It's currently sitting at home in my desk waiting to be used and I can hear it crying because I'm thinking of selling it.
http://img345.imageshack.us/img345/834/setup61hi.th.jpg (http://img345.imageshack.us/my.php?image=setup61hi.jpg)
Second up, my dearly loved Powerbook G3 Wallstreet.
266mhz G3 Processor
128MB RAM
10GB HDD
4MB Shared Video RAM
2 PC Card slots
14" TFT Screen
CD-ROM Drive
This also, an EXCELLENT backup laptop. It's currently loaded with OS 9.2. I was originally planning to upgrade this puppy BIG TIME but I've run into cash problems. Only problem with this laptop is that the battery is dead.
http://img319.imageshack.us/img319/8726/wallstreet10yi.th.jpg (http://img319.imageshack.us/my.php?image=wallstreet10yi.jpg)
Let me know if you're interested at all and maybe make me an offer? I'm not sure if I want to sell these but all signs are pointing to yes.
iSayuSay
May 3, 11:58 PM
The new Radeon 6 series including EyeComfort .. you should check their website more often :D
Maybe you're just too excited you forget that your eyes actually a bit strained, you know .. a tiny bit :p
Maybe you're just too excited you forget that your eyes actually a bit strained, you know .. a tiny bit :p
No comments:
Post a Comment